Sony KV-14V4U TV VCR Combo User Manual


 
29
Basic Operations
GB
Just enter the programme’s “PlusCode” listed in the TV programme guide.
The date, times and programme position of that programme are set
automatically.
Before you begin
Press ;, PROGR +/– or a number button on the Remote Commander, or
PROGR +/– on the video TV to switch on the video TV.
Make sure that the time and date clock are set correctly. If not, refer to
“Setting the clock” on page 14.
Make sure that the loaded cassette has its safety tab.
1 Press VIDEO Plus+.
The SHOWVIEW menu appears.
2 Press the number buttons to enter the desired programme’s PlusCode.
3 Press ONCE, DAILY or WEEKLY you want to set.
For each setting, see table below.
To record the programme Press
Only once ONCE
Monday to Friday at the same scheduled time DAILY
Every week at the same scheduled time WEEKLY
If you have made a mistake
entering programme‘s
PlusCode
Press TIMER REC CLEAR and re-
enter the correct number.
Recording TV programmes using
VIDEO Plus+
ON TIMER MENU
SLEEP
PROGR
REC
PAUSE
TIMER ON
SCREEN
QUICK
TIMER
COUNTER
RESET
TIMER REC
ON/OFF
OK
÷
REW FF
STOP
PLAY
VIDEO Plus+
ONCE
DAILY
WEEKLY
CLEAR
12
3
45
6
0
78
9
The recording information appears: date, start and stop times,
programme position number.
Check that the information is correct. If it is not, press TIMER CLEAR to
cancel the setting.
SHOWVIEW
[
SHOWVIEW NO
---------
]
Set 0-9 and
press ONCE DAILY WEEKLY
20:00
4. 12WED
SHOWVIEW
[
SHOWVIEW NO
82477691-
]
Set 0-9 and
press ONCE DAILY WEEKLY
20:00
4. 12WED
SHOWVIEW
[
SHOWVIEW NO
82477691-
]
Press TIMER REC
[ON/OFF]button
DATE START STOP PROG
6 FRI 20:00 22:00 58
20:00
4. 12WED