Filter
Top Products
37
Additional Information
GB
Problems
The cassette is ejected
when you press
REC r.
Recording cannot be
done.
Timer settings cannot
be made.
The cassette is ejected
when you press
TIMER REC ON/
OFF.
The TIMER REC lamp
does not light up
even though you
press TIMER REC
ON/OFF.
Timer recording was
not made.
A cassette cannot be
inserted.
The Remote
Commander does not
work.
Function
Recording
Timer
recording
Others
Possible causes and remedies
• The safety tab of the cassette has been removed.
/Cover the tab hole with adhesive tape, or use another cassette
with a safety tab. (page 19)
• No cassette has been inserted.
/Insert a cassette with the safety tab.
• The tape is at its end.
/Rewind the tape.
• The clock has not been set.
/Set the current time and date. (page 14)
• You have made a mistake when setting the timer.
/Check the setting steps. (pages 23 to 25)
• The safety tab of the cassette has been removed.
/Cover the tab hole with adhesive tape, or use another cassette
with a safety tab.
• No cassette has been inserted.
/Insert a cassette with its safety tab.
• The tape is at its end.
/Rewind the tape.
• No setting is made for timer recording.
/Set the programme for timer recording. (pages 23 to 25)
• You did not press TIMER REC ON/OFF.
• There has been a power interruption lasting more than a week.
• Another cassette is already inserted.
/Press 6 to eject the cassette.
• The batteries are low.
/Replace the batteries. (page 4)
• The batteries are installed incorrectly.
/Install the batteries with correct polarities. (page 4)