Filter
Top Products
Setting cable TV on or off Presetting channels
If you have connected the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF. You do not have to do this procedure if you
execute AUTO SET UP (page 10). Do this procedure
only when you want to set it manually.
1 Press MENU.
2 Press + _ or - 4 to move the cursor (1_)to
SET UP and press RETURN.
3 Press + 4,or - • to move the cursor (1_)
to CH SET UP and press RETURN.
CH SET UP
-CABLE : ON
AUTO PR(_zCl/ZM
CH ERASEtAD_
:_MENU
Use €ltifiiIExitlj
4 Set CABLE to ON or OFF:
(1) Make sure the cursor (1_-)is beside CABLE and
press RETURN.
If the cursor is not beside tABLE, press + t' or
- • to move the cursor and press RETURN.
(2) Press + _.or - # to select ON or OFF and, press
RETURN.
CH SET UP
PCABLE : OFF
AUTO PROGRAM
CH ERASE/ADD
:_ENU
Use B_ Exit _
5 Press MENU to return to the original screen.
Note
• If CH SET UP appears in black, the TV is set to a video input
and you cannot select CABLE. Press TV/VIDEO or TV so that
a charmel number appears.
You can preset TV channels easily by using the AUTO
PROGRAM feature. You do not have to do this
procedure if you execute AUTO SET UP (page 10). Do
this procedure only when you want to set it manually.
1 Press MENU.
2 Press + t or - 4, to move the cursor (1_)
to SET UP and press RETURN.
3 Press + • or - • to move the cursor (1_)
to CH SET UP and press RETURN.
H SET UP
bCABLE : ON
AUTO pROGFIAM
CH ERASE/ADO
:_t4ENU
se €_i_ Exil _
4 Press + ) or - t to move the cursor (,)
to AUTO PROGRAM and press RETURN.
"AUTO PROGRAM" appears on the screen and the
TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed.
5 Press MENU to return to the original screen.
Notes
• If the CH SET UP menu appears in black, the TV is set to a
video input and you cannot select AUTO PROGRAM. Press
W/VIDEO or'IV so that a channel number appears.
• Presetting channels is also available for the AUX input. (KV-
32V15/32V16/34V15C only)
12 j GettingStarted