Filter
Top Products
– 17 –
KV-J14P2S/J51PF2S
RM-869
Entering service mode
With the unit on standby
↓
DISPLAY
↓
5
↓
VOL (+)
↓
POWER
The operation sequence puts the unit into service mode.
SECTION 5
CIRCUIT ADJUSTMENTS
5-1. ADJUSTMENTS WITH COMMANDER
Service adjustments are made with the RM-869 that comes with
this unit.
[1], [4] Raise/lower the service item number
[3], [6] Raise/lower the data
[MUTING] Writes
[0] Executes the writing
[7], [0] All data becomes the values in memory
[8], [0] All user control goes to the standard state
[5], [0] Service data initialization (Be sure not to use
usually.)
[2], [0] Write 50Hz adjustment data to 60Hz, or
viceversa.
The screen display is :
[1], [4] Select the adjustment item.
↓
[3], [6] Raise/lower the data.
↓
[MUTING] Writes
↓
[0] Executes the writing.
RM-869
SERVICE Mode08
DATA
RGB
50 Depends on the signals
PAL, SECAM : 50
NTSC : 60
10000000
Adjustment item
058S
Item number
1
2
3
4
6
7
8
9
÷
0
5
TV