Filter
Top Products
– 8 –
KV-J14P2S/J51PF2S
RM-869
11
Operations
-EN
Troubleshooting
Additional Information
If you have any problems, read this manual again and
check the countermeasure for each of the symptoms
listed below.
If the problem persists after trying the methods below,
contact your nearest authorized service center or dealer.
Snowy picture
Noisy sound
/Check the antenna.
/Check the antenna connection on the TV
and on the wall.
Dotted lines or stripes
/This may be caused by local interference
(e.g. cars, neon signs and hair dryers).
Adjust the antenna for minimum interference.
Double images or “ghosts”
/
This may be caused by reflections from
nearby mountains or buildings. A high
directional antenna may improve the picture.
Good picture
No sound
/Press
.
+.
/Press
¤.
Good picture
Noisy sound
/Reduce the TREBLE level or select the
“SOFT” sound mode. (KV-J51PF2S only)
No picture
No sound
/Press
Uor u.
/Check the antenna connection.
/Check the VCR connections.
/Check the power cord connection.
/Check the standby mode.
No color
/
Adjust the COLOR level in the on-screen display.
/Check the COLOR SYSTEM setting.
TV cabinet creaks
/Even if the picture or the sound is normal,
changes in the room temperature sometimes
make the TV cabinet expand or contract, making
a noise. This does not indicate a malfunction.
Note on the remote commander
• The supplied remote commander is used on several models of
the TV. If you do not find instructions for some controls that are
on the remote commander, that means your TV does not employ
the features of those controls, e.g. SOUND MODE and
L
.
Notes
• When you turn on the TV, you may hear the “boom” sound
that is caused by the demagnetization of the TV. This does not
indicate a malfunction.
•
The picture color may become abnormal if you change the direction
of your TV. To obtain the normal picture color, press
U
on the TV
to turn off the TV for five minutes and then turn it on again.
• The TV illustration of KV-J14 models have been used for
illustration purpose in this manual.
• Design and specifications are subject to change without notice.
• All contents in the instruction manual are subject to change
without notice.
WARNING
Do not install the appliance in a confined space, such as
a bookcase or built-in cabinet.
Additional Information
Operations
10
-EN
Adjusting the sound and picture
settings
1
Press SELECT until the item you want to
adjust appears.
Each time you press SELECT, the screen changes as follows:
2
Press +/ – to adjust the item.
3
To adjust other items, repeat steps 1 and 2.
Notes
• You can also use SELECT and
.
+/– on the TV to adjust the
sound and picture settings.
• The on-screen display for BASS, TREBLE and BALANCE are
available for KV-J51PF2S only.
If the picture color is abnormal when receiving
programs through the
˘
(antenna) terminal
Change the “COLOR SYSTEM” setting or adjust the “COLOR”
level in the on-screen display until the color becomes normal.
If the picture color is abnormal when receiving
programs through the
…
(video input) jack
Change the “COLOR SYSTEM” setting or adjust the “COLOR”
level in the on-screen display until the color becomes normal.
Note
• Normally set “COLOR SYSTEM” to “AUTO”.
÷
0
SOUND
MODE
SELECT
PIC MODE
+/–
Adjusting the sound
and picture
SELECT
PICTURE
COLOR BRIGHT
HUE
SHARPNESS
BASS
BALANCE
TREBLE
(Operative for
NTSC signal only)
—
PROGR
+
SELECT
…
—
.
+
Front of TV
Selecting the sound mode
pKV-J51PF2S only
Press SOUND MODE until the mode you want
appears.
Each time you press SOUND MODE, the screen
changes as follows:
Selecting the picture mode
Press PIC MODE until the mode you want
appears.
Each time you press PIC MODE, the screen changes as
follows:
Note
• If you change the picture mode after the following
adjustments, the adjustment changes in accordance with the
picture mode.
High contrast
picture
Soft picture
(good for video
games)
DYNAMIC
STANDARDSOFT
Normal
picture
SOUND
MODE
≥
MUSIC
≥
DRAMA
≥
SPORTS
≥
SOFT
Emphasize
low and high
sound effect
Emphasize
huge
audience
atmosphere
Emphasize
vocals and
background
music
Emphasize
soft sound
PIC MODE
(KV-J51PF2S
only)