Filter
Top Products
8
Getting Started - Installation
Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Inserting Batteries into the Remote Control
Getting Started - Installation
Connecting the Aerial and VCR
Switching on the projection TV
Connect the projection
TV plug to the
mains socket (220-
240V AC, 50Hz).
Push in the
On/Off
switch on the front of the
projection TV.
The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the “Manually Tuning the TV” section
of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to
find out how to find the output channel of your VCR.
or
OUT IN
VCR
01GB.fm Page 8 Monday, June 4, 2001 3:47 PM