Filter
Top Products
21 (GB)
Using On-screen Menus
6 COLOR TEMP
Changes the color temperature.
For details, see “COLOR TEMP” on page 28 (GB).
7 SHARPNESS
Changes the outline correction level using the
following three levels (HIGH, MID or LOW).
For details, see “SHARPNESS” on page 29 (GB).
8 RESET
Restores the factory settings in the PIC CONTROL
menu items 1 to 7.
For details on using the reset function, see “Restoring the
PIC CONTROL Menu Items to Their Original Settings” on
page 29 (GB).
PIC SIZE menu
This menu is used for resizing and positioning the
picture.
ENTER
MENU
PIC SIZE
HSIZE : 00
HSHIFT : 00
VSIZE : 00
VSHIFT : 00
R ESET
ASPECT : 4X3
ZOOM : X1
qs
qa
q;
9
qd
qf
qg
qh
PIXEL ADJUST
SELECT SET END
9 H SIZE
Adjusts the horizontal picture size. Press v to enlarge
the horizontal size and press V to diminish it.
q; H SHIFT
Adjusts the horizontal centering. Press v to move the
picture to the right and press V to move it to the left.
qa V SIZE
Adjusts the vertical picture size. Press v to enlarge
the vertical size and press V to diminish it.
qs V SHIFT
Adjusts the vertical centering. Press v to move the
picture up and press V to move it down.
qd RESET
Restores the factory settings in PIC SIZE menu items
9 to qs.
For details on using the reset function, see “Restoring the
Original Picture Size and Position” on page 31 (GB).
qf ASPECT
Changes the aspect ratio of the picture.
For details, see “Changing the Aspect Ratio” on page
32 (GB).
qg ZOOM
Enlarges the image (in order) to double (×2), triple
(×3) and quadruple (×4).
Note
When you set ASPECT to W ZOOM or LB ZOOM,
“– – – –” appears and you cannot set ZOOM to ×2, ×3
or ×4.
qh PIXEL ADJUST
Adjusts the dot phase and the total number of
horizontal pixels when you see noise on the edges of
the characters and the vertical lines.
For details, see “Adjusting the Pixels” on page 33 (GB).
CONFIG menu
This menu is used for adjusting the signal or selecting
the language. This menu consists of two pages;
CONFIG (1/2), CONFIG (2/2). To toggle between
pages, press the v / V buttons repeatedly until the
other page appears.
ENTER
MENU
CONF I G( 1/2)
DISPLAY : ON
W-VGA : OFF
CLOSED CAPTION: OFF
COLOR SYSTEM : AUTO
SCREEN FI LL :CENTER
POWER CONTROL
SCREEN SAVER
w;
ql
qk
qj
wa
ws
wd
SELECT SET END
YUV LEVEL : SMPTE
wf
PFM-42B1/42B1E: “YUV LEVEL” is not displayed.
ENTER
MENU
CONF I G( 2/2)
TIME SET
LANGUAGE
wh
wg
SELECT SET END
SERIAL REMOTE
NETWORK ADAPTOR
wk
wj
PFM-42B1/42B1E: “SERIAL REMOTE” is not displayed.
If you have installed the Network Adaptor (BKM-B30NW),
the “NETWORK ADAPTOR” is added but it does not
appear in the PFM-42B1/42B1E.