Filter
Top Products
33 (GB)
3 Adjust the linearity with
v
/
V
.
To restore wide zoom mode items to their
original settings
In the ASPECT menu, select W ZOOM and press
ENTER. Press
v
/
V
to move the cursor (B) to
“RESET” and press ENTER. Then select YES with
v
/
V
and press ENTER.
Note
While you are adjusting H SIZE, H SHIFT, V SIZE,
V SHIFT, H LINEARITY or V LINEARITY, the
value displayed on the display panel is not
synchronized with the change.
Changing the Aspect Ratio / Adjusting the Pixels
Adjusting the Pixels
If there is too much noise on the edges of the
characters or the vertical lines, you can adjust the dot
phase and the total number of horizontal pixels.
1 Press MENU.
The main menu appears on the display panel.
ENTER
MENU
MA I N MENU
INPUT SELECT
PIC CONTROL
PIC SIZE
CONF I G
MEMORY
REMOTE
STATUS
S ELECT SET END
2 Press
v
/
V
to move the cursor (B) to “PIC SIZE”
and press ENTER.
The PIC SIZE menu appears on the display panel.
ENTER
MENU
PIC SIZE
HSIZE : 00
HSHIFT : 00
VSIZE : 00
VSHIFT : 00
R ESET
ASPECT : 4X3
ZOOM : X1
PIXEL ADJUST
S ELECT SET END
3 Press
v
/
V
to move the cursor (B) to “PIXEL
ADJUST” and press ENTER.
The following menu appears on the display panel.
ENTER
MENU
PIXEL ADJUST
AUTO
DOT PHASE : 50
TOTAL H P IXEL : 800
R ESET
S ELECT SET END