Filter
Top Products
36 (GB)
2 Select a memory number (01 to 20) with
v
/
V
and press ENTER.
The second page of the stored settings appears on
the display panel.
ENTER
MENU
LOAD/No.01 [··········]
-RGB/
fH
3 1.5
kHz
/fV59.9
Hz
/POL[N/N]-
CHROMA : 00
PHASE : 00
PICTURE AGC : ON
SHARPNESS : MID
HLINEARITY : 00
VLINEARITY : 00
DOT PHASE : 50
TOTAL H PIXEL : 800
SELECT SET END
The signal type and the color system or horizontal/
vertical frequency are displayed in cyan (showing
that the signal type of the selected memory
number is the same as that of the current setting
and you can call up the stored setting) or in red
(showing that the signal type of the selected
memory number is not the same as that of the
current setting and you cannot call up the stored
setting).
3 Press ENTER.
The “LOAD COMPLETED” message appears and
flashes for about five seconds and the picture is
adjusted to the selected setting.
Note
If the loading fails, the “LOAD ERROR” message
appears on the display panel. Try to load the setting
again.
Selecting the On-screen
Language
You can select the on-screen language from among
English, German, French, Italian, Spanish or
Japanese.
1 Press MENU.
The main menu appears on the display panel.
ENTER
MENU
MA I N MENU
I NPUT SELECT
PIC CONTROL
PIC SIZE
CONF I G
MEMORY
REMOTE
STATUS
SELECT SET END
Using the Memory Function / Selecting the On-screen Language
2 Press
v
/
V
to move the cursor (B) to “CONFIG”
and press ENTER.
The CONFIG (1/2) menu appears on the display
panel.
ENTER
MENU
CONF I G( 1/2)
DISPLAY : ON
W-VGA : OFF
CLOSED CAPTION: OFF
COLOR SYSTEM : AUTO
SCREEN F I LL :CENTER
POWER CONTROL
SCREEN SAVER
SELECT SET END
YUV LEVEL : SMPTE
3 Press
v
/
V
to move the cursor (B) to
“LANGUAGE” on the CONFIG (2/2) menu and
press ENTER.
The following menu appears on the display panel.
ENTER
MENU
LANGUAGE
ENGL ISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SELECT SET END
4 Press
v
/
V
to move the cursor (B) to the desired
language and press ENTER.
The on-screen language is switched to the one you
selected.
ENGLISH: English
DEUTSCH: German
FRANÇAIS: French
ITALIANO: Italian
ESPAÑOL: Spanish
: Japanese
5 Press MENU.
The menu returns to the CONFIG (2/2) menu.