Filter
Top Products
41 (GB)
The following menu appears on the display panel.
ENTER
MENU
POWER CONTROL
POWER SAV ING : OFF
ON /OFF T IMER : OFF
SELECT SET END
ENERGY SAVI NG : OFF
PFM-42B1/42B1E: “ENERGY SAVING” is not displayed.
2 Press v / V to move the cursor (B) to “ON/OFF
TIMER” and press ENTER.
The following menu appears on the display panel.
ON /OFF T IMER : OFF
3 Select ON with v / V and press ENTER.
The following menu appears on the display panel.
ENTER
MENU
ON /OFF T IMER : ON
ON T IME : 00 : 00
OFF T IME : - - : - -
SELECT ADJUST END
TIMER MODE : ON
Note
The screen being displayed may differ depending on
the timer mode previously set. The steps described
here assume that the last timer mode has been set to
ON. The factory default is ON/OFF.
4 Press ENTER again on this screen to select the
timer mode.
Controlling Power On/Off Automatically (Power Control Function)
The following menu appears on the display panel.
ON /OFF T IMER : ON
TIMER MODE : ON
5 Press v / V to move the cursor (B) to “ON/OFF”
and press ENTER.
The following menu appears on the display panel.
ENTER
MENU
ON /OFF T IMER : ON
ON T IME : 00 : 00
OFF T IME : 00 : 00
SELECT ADJUST END
TIMER MODE:ON/OFF
6 Press v / V to move the cursor (B) to “ON
TIME” and press ENTER.
The following menu appears on the display panel.
The area behind the hour is displayed in cyan.
ENTER
MENU
ON /OFF T IMER : ON
ON T IME : 16 : 30
S ELECT SET END
7 Press v / V to set the hour and press ENTER.
The time is entered and the area behind the
minutes is displayed in cyan.
8 Press v / V to set the minute and press ENTER.
9 Press v / V to move the cursor (B) to “OFF
TIME” and press ENTER. Do the same thing for
the power on hour and minute.
When the power-off timer expires, the system
power is turned off, the standby mode is activated,
and the ON indicator flashes.