Sony RDR-HDC100 DVD Recorder User Manual


 
23
Hookups and Settings
Connecting a VCR or Similar Device
After disconnecting the recorder’s AC power cord (mains lead) from the mains, connect a
VCR or similar recording device to the LINE IN jacks of this recorder.
To watch the connected VCR or a similar device’s picture through the recorder while the
recorder is in standby mode, set “Standby Mode” to “Mode 2” in the “System 1” setup
(page 72). If not, the picture will not appear.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 63).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see “Recording from Connected Equipment” on page 39.
Connect a VCR or similar recording device to the LINE 1 jack of this recorder.
To connect the EURO AV adapter, see page 17.
Connecting to the LINE 1 jack
DVD recorder
to i LINE 1
Audio/video cable
(not supplied)
: Signal flow
EURO AV adapter (supplied)
The red plug at right (page 17)
VCR, etc.
,continued