Filter
Top Products
Overview
Features / Precautions
GB
4
Overview
Features
The optical three-axis joystick allows
comfortable pan/tilt/zoom operations.
Easy operation of versatile camera
adjustments
Using the buttons on the unit, you can easily perform
various camera adjustments such as auto focusing, one-
push auto focus adjustment, AE adjustment, one-push
auto white balance adjustment and backlight
compensation.
The VISCA RS-232C/RS-422 communication
interfaces allow high-speed, long-distance
communication.
The unit is capable of controlling up to seven cameras
connected in daisy chain.
A tally lamp input/contact output terminal (9-
pin connector plug) allows connection of a
video switcher.
Preset feature to save camera settings
The unit allows saving up to 16 combinations* of
camera settings such as pan/tilt/zoom positions and
other camera adjustment values in the memory of the
camera.
* The number of positions to be saved differs depending
on the connected camera
Controllable Sony VISCA cameras
The unit can control the following cameras:
• BRC-300/300P 3CCD Color Video Camera
• EVI-D100/D100P Color Video Camera
• EVI-D70/D70P Color Video Camera
• EVI-D30/D30P Color Video Camera
This manual explains the functions of the unit for the
EVI-D100/D100P, EVI-D70/D70P and EVI -D30/D30P
cameras.
For functions when the BRC-300/300P is connected,
refer to the Operating Instructions supplied with the
BRC-300/300P.
Note
The operable functions are limited to those that the
camera is equipped with.
Precautions
Operating or storage location
Operating or storing the unit in the following locations
may cause damage to the unit:
• Extremely hot or cold places (Operating temperature:
0
°C to +40°C [32°F to 104°F])
• Exposed in direct sunlight for a long time, or close to
heating equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful electromagnetic
radiation, such as radios or TV transmitters
• Locations subject to strong vibration or shock
Ventilation
To prevent heat buildup, do not block air circulation
around the unit.
Transportation
When transporting the unit, repack it as originally
packed at the factory or in materials equal in quality.
Cleaning
• Use a soft, dry cloth to clean the external surfaces of
the unit. Stubborn stains can be removed using a soft
cloth dampened with a small quantity of detergent
solution, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene
or thinners as they may damage the surface finishes.