Filter
Top Products
13
1 Press and while holding
SET, press MENU.
The SET indicator lights up.
2 Press the Component Select
button for the desired
component.
The SET indicator and the
selected Component Select
button lights up.
3 Press CH + or CH – and
POWER in turn until the
component reacts as
described in the following.
TV: Powers off
VCR, CBL, DVD, AMP: Powers
on
CD player, MD player, cassette
deck: Plays back
Press CH + to go to the next
code number.
Press CH – to go back to the
previous code number.
The Component Select button
flashes three times after the
numbers have turned one cycle.
One cycle means, for example,
the four-digit code numbers
beginning from “8” are cycled
through.
SET
POWER
SATDVDTV CBL
TAPE
CDVCR
1
VIDEO1
2
VIDEO2
3
AUX
4
TUNER
5
CD
6
TAPE
7
MD
8
TV
9
PHONO
VOL CH
0
DVD
DIGITAL
/ANALOG
TWIN VIEW
SLEEP
INFO
GUIDE MENU
EXIT
TOOLS
SYSTEM CONTROL
RECALL
MUTING
AMP
ENT
OK
ABCD
TV/VIDEO
1
2
4
3
3
1
Setting a Component
Code by the Search
Function
You can find a code number
available for a component that
doesn’t have one in the supplied
“Component code numbers.”
Before starting the Search
function
Set each component to the
following status so that the Search
function works effectively.
TV, AMP: Power-on
CD player, MD player*, cassette
deck: Power-on with a playback
source (disc, cassette tape, etc.)
Other components: Power-off
* If any of these components are
assigned to any of the
Component Select buttons (page
33), you can set a component
code using the Search function.
Continued
SET
TV
SET
SATDVDTV CBL
TAPE
CDVCR AMP
CH
POWER
SET
MENU
+