Sony SAT-A2 Satellite TV System User Manual


 
84 Appendix: Other Information
SAT-B2 Remote Control
Button Operates Description
CABLE: Turns the cable box on and off.
TV: Turns the TV on and off.
DSS: Turns the DSS receiver on and off.
CABLE: Puts the remote in cable mode. In cable
mode, the remote operates your cable box.
TV: Puts the remote in TV mode. In TV mode, the
remote operates your TV.
DSS: Puts the remote in DSS receiver mode. In DSS
mode, the remote operates your DSS receiver.
DSS Used for programming the remote to operate your
TV or cable box.
DSS Used for setting up and using the Favorite Station
Guides. See “Using the Favorite Station Guides” on
page 40 for details.
TV Switches the input of the TV.
DSS Switches the output of the DSS receiver to TV
(normal TV programs), if you’ve connected a TV
cable or antenna, or to DSS programs.
DSS
TV
Cable
DSS: Used to tune to and set stations in the Jump
Loop (DSS). See “Using the Jump Loop Feature” on
page 51 for details. TV, Cable: Tunes to the last
station you were tuned to.
DSS
TV
Cable
Specifies the station number. DSS: In menus, selects
the menu item with the corresponding number.
Also, in some screens, used to enter numerical
values (such as a spending limit or passcode).
DSS
TV
Toggles through the different displays of on-screen
guides (DSS) or other display (TV). See “Using the
DISPLAY Feature” on page 44 for details.
DSS
TV
Cable box
Used with 0-9 buttons to change stations without
any delay in tuning.
DSS
TV
Clears all on-screen displays, including program
guides, menus, etc. If you press EXIT before you
complete your selections, the previous selections
are restored.
DSS
TV
Brings up the Main Menu (Sony-brand TVs only.)
DSS Brings up the Custom Guide. If you’re already in a
program guide, pressing GUIDE repeatedly brings
up future time slots in the guide.
DSS
TV
When moved up, down, left, and right, highlights
items in the on-screen displays (program guides,
menus, etc.). When pressed, selects highlighted
items. When pressed during normal DSS-viewing,
brings up the Station Index (unless a message
appears).
TV
DSS
VOL: Increases and decreases the volume.
CH/PAGE: Moves to the next (+) or previous (-)
station during normal viewing. In DSS program
guides and some setup screens, these buttons page
through the on-screen displays.
to