Filter
Top Products
SFM1
Page 10 Installation Manual
Wood Stud Location
1. Using a stud finder, locate the 16” or 24” stud centers behind the wall.
2. Once found, make a pencil mark on the center of the wood studs (Figure 9).
NOTE
: The wall plates have three 16” and 12” mounting slot positions.
16"
Figure 9. Locating the Wooden Stud
3. Measure from the floor to the desired viewing height and mark the wall (Figure 10).
NOTE: This marking will reference the center of your flat panel display once mounted to the wall.
16"
Figure 130. Measuring the Height
W
ooden Studs
b
ehind the Wall
Structure
W
ooden Studs
Stud Finder
M
easure and
M
ark the Desired
V
iewing Height
on the Wall