Filter
Top Products
18
Connecting the VCR
Master Page : Left
filename[010get.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]
model name3[SLV-SE710I] model name4[SLV-SE810G]
[3-065-677-11 (1)]
Note
• Not all TVs respond to the functions above.
Additional connections
To a stereo system
(not available on
SLV-SE610G)
You can improve sound
quality by connecting a
stereo system to the R/D
L/G jacks as shown on the
right.
To a set top box with
Line Through
(not available on
SLV-SE610G)
Using the Line Through
function, you can watch
programmes from a set top
box connected to this VCR
on the TV even when the
VCR is turned off. When
you turn on the set top box,
this VCR automatically sends
the signal from the set top
box to the TV without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a programme from your set top box.
*
1
SLV-SE810G only
*
2
SLV-SE710G and SE710I only
1
Connect the set top box to the LINE-3 IN
*
1
(or LINE-2 IN
*
2
) connector
as shown above.
2
Set POWER SAVE to OFF or PARTIAL
*
1
in the OPTIONS-2 menu.
3
Turn off the VCR.
To watch a programme, turn on the set top box and the TV.
Audio cable (not supplied)
R/D L/G
LINE IN
: Signal flow
Scart cable (not supplied)
t LINE-3 IN*
1
or
t LINE-2 IN*
2
LINE OUT
: Signal flow