Filter
Top Products
AC68-02164N
Sony Corporation Printed in Indonesia
Quick Start Guide
1 Connecting the VCR
1...Connect the aerial to of the VCR.
2...Connect and the aerial input of your
TV using the supplied aerial cable.
3...For better picture and sound, connect
LINE-1 (EURO AV) to your TV using a
Scart cable if your TV has a Scart
(EURO-AV) connector.
4...Connect the mains lead to the mains.
2 Using the Auto Set Up function
1...Turn on your TV and set it to the video
channel.
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel of this
VCR). Refer to your TV’s manual for
TV tuning instructions. If the picture
does not appear clearly, see “To change
the RF channel.”
2...Connect the mains lead to the mains.
3... Press M/m/</, to select a language,
then press OK.
4... When the COUNTRY SELECTION
menu appears, press M/m/</, to
select a country, then press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see “Changing/
disabling programme positions”).
3 Setting the clock
1... Press MENU, then press M/m/</, to
highlight CLOCK SET and press OK.
2... Press M/m to set the hour, then press ,.
3... Press M/m to set the minutes. Set the
day, month, and year in sequence by
pressing , to select the item to be set,
and press M/m to select the digits, then
press OK.
4... Press MENU.
Now you can operate your VCR.
1
2
3
4
:Signal flow
LINE-1
(EURO AV)