Filter
Top Products
40
Recording TV programs using the timer
2
Press V/v/B/b to select (Set Timer
Recording), then press ENTER.
The program menu appears.
3
If necessary, press V/v to select the row that is to be set.
4
Set the channel number, start and stop time,
date, and tape speed:
1 Press b to flash each item in turn.
2 Press V/v to set each item.
To correct a setting, press B to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or V/v to display “L1 ” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press v
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press v to display “AUTO” in the
“SPD” position. For details, see “To use the Auto Tape Speed function” on
page 41.
5
Press O RETURN to confirm the setting.
The indicator appears in the display window.
To enter another setting, press V/v to select the next row and repeat step 4.
Press CLEAR repeatedly to cancel the setting.
6
Press O RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (timer recording will operate
properly regardless if the DVD-VCR power is on or off). When using a
cable box, leave it on.