Filter
Top Products
45
Recording TV programmes using the VIDEO Plus+
®
system
Basic Operations
2
Press V/v to select “VideoPlus,” then press
ENTER.
The “VideoPlus” menu appears.
3
Press the number buttons to enter the PlusCode
number.
If you make a mistake, press CLEAR and
re-enter the correct number.
You can also press B to delete the last entered
number.
4
Press ENTER.
The programme position, date, start and stop
times, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
• If “– –” appears in the “PR” (programme)
column (this may happen for local
broadcasts), you have to set the appropriate programme position
manually.
Press V/v to select the desired programme position. Without setting the
programme position, you cannot select the date, start and stop times, tape
speed and PDC setting.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the “PR”
position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
ENTER
RETURN
SET UP
Code –––– –––– –
Code
VideoPlus
B
: 0–9
Correct :
123
456
789
0
CLEAR
ENTER
RETURN
SET UP
ENTER
Code 1234 –––– –
Code
VideoPlus
B
: 0–9
Correct :
INPUT
SELECT
ENTER
CLEAR
35
––
––
––
––
––
SP
––
––
––
––
––
Off
––
––
––
––
––
19
––
––
––
––
––
19 : 00
––:––
––:––
––:––
––:––
––:––
20 : 00
––:––
––:––
––:––
––:––
––:––
CLEAR
SETUP
ENTER
v
V
b
B
SA
––
––
––
––
––
PR DATE START STOP SPEED
PDC
continued