Sony SLV-D980P DVD VCR Combo User Manual


 
56
S-Video/Component Video hookup
B Use this hookup if your TV has component video input jacks
Connect your TV via the COMPONENT VIDEO OUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and
length. You will enjoy accurate color reproduction and high quality images.
See page 60 for audio connections.
If your TV accepts progressive (525P/625P) format signals, you must use this
connection and then set “Progressive” to “On” in the “SCREEN SETUP” menu
(page 62). The PROGRESSIVE indicator lights up in orange when the DVD player
outputs progressive signals.
Notes
The connection using COMPONENT VIDEO OUT jack is only for the DVD player.
Consumers should note that not all high definition television sets are fully compatible with
this product and may cause artifacts to be displayed in the picture. In case of progressive
scan picture problems, it is recommended that you switch the connection to the standard
definition output. If there are questions regarding your Sony TV set’s compatibility with this
DVD player, please contact our customer service center.
l : Signal flow
(DVD only)
Component video cord
(not supplied)
TV
(green)
(red)
(red)
(green) (blue)
DVD-VCR
(blue)
PROGRESSIVE indicator