Filter
Top Products
43
Recording TV programmes
Basic Operations
Master Page : Right
filename[010bas.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
To check the remaining time
Press AFFICH. With the display on, press COMPT/DUREE REST to
check the remaining time. Each time you press COMPT/DUREE REST, the
time counter and the remaining time appear alternately. The indicator
indicates the remaining time.
In order to get an accurate remaining time indication, be sure DUREE
CASSETTE in the OPTIONS-1 menu is set according to the tape type you
use(seepage70).
To watch another TV programme while recording
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the - (ten’s digit) button
followed by the programme number buttons.
• If you connect additional equipment to the LIGNE-1 (TV) or ENTREE LIGNE-2
connector, you can select the input signal using the CHOIX ENTREE or
CHAINE +/– buttons.
• The AFFICH information appears on the TV screen indicating information
about the tape, but the information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
1
Press t TV/MAGN to turn off the MAGN indicator in the display
window.
2
Select another programme position on the TV.
61:4SP 20:00:2
Remaining time
Time counter
Safety tab
continued