Filter
Top Products
66
Adjusting the picture
Master Page : Left
filename[010addo.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the indicator
flashes in the display window, then turns off),
distortion may occur if the recording is in
poor condition. In this case, manually adjust
the tracking.
During playback, press CHAINE +/–
on the
VCR to display the tracking meter. The
distortionshoulddisappearasyoupressone
of the two buttons (the indicator lights up).
To resume automatic tracking adjustments, eject the tape and re-insert it.
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC)
function automatically improves recording
and playback quality by adjusting the VCR to
the condition of the video heads and tape. To
maintain better picture quality, we
recommend that you set OPC to OUI in the
OPTIONS-1 menu (the OPC indicator lights
up in the display window). For details, see
page 69.
OPC playback
The OPC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with OPC.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR
adjusts to the tape using the OPC function (the OPC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
To deactivate the OPC function
Set OPC to NON in the OPTIONS-1 menu. The OPC indicator in the
display window turns off.
Tip
• To set tracking to the centre position, press the CHAINE + and – buttons at the
same time.
ALIGNEMENT
Tracking meter
MENU:
OPTIONS - 1
:
:
OKREGLER
SELECTIONNER
OPC
VITESSE AUTO.
DUREE CASSETTE
OUI
NON
E180
SORTIE
STANDARD COULEUR AUTO
RETOUR