Filter
Top Products
32
About the Teletext function
Some broadcasts systems ensure a Teletext
service* in which the complete programmes and
their data (title, date, channel, recording start time
etc.) are stored day by day. When recording a
programme, the recorder automatically takes the
programme name from the Teletext pages and
stores it as the title name. For detail, see “TV
Guide Page” on page 79.
Note that the Teletext information will not appear
on your TV screen. To view the Teletext
information on your TV screen, press t TV/
VIDEO on the remote to switch the input source to
your TV.
* not available in some areas
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.
b Notes
• After pressing
z REC, it may take a short while to
start recording.
• You cannot change the recording mode while
recording or during recording pause.
• If there is a power failure, the programme you are
recording may be erased.
• You cannot watch a PAY-TV/Canal Plus programme
while recording another PAY-TV/Canal Plus
programme.
• To use the TV Direct Rec function, you must first set
the recorder’s clock correctly.
You can check the recording information such as
recording time or disc type.
Press DISPLAY twice during recording.
The recording information appears.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
3. Playing the Recorded
Programme (Title List)
To play a recorded title, select the title from the
Title List.
1 Press HDD or DVD.
If you select DVD, insert a DVD (see
“Inserting a Disc” on page 29).
Playback starts automatically depending on
the disc.
2 Press TITLE LIST.
To show the extended Title List, press
TOOLS to select “Display List,” and press
ENTER.
Checking the disc status while
recording
+
RW
-
RWVR
-
RW
Video
-
R
+
R
HDD
1 2 3
4 6
7 8 9
0
5
TOOLS
H/X/x
M/m,
ENTER
HDD
DVD
TITLE LIST
/
Mm