Filter
Top Products
16
Getting Started
TV Hookups (continued)
Setups for the player
Some setup adjustments are necessary for the player depending on the TV or
other components to be connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 74.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9”
(default setting). For details, see page 82.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER
BOX” or “4:3 PAN SCAN.” For details, see page 82.
When you play a disc recorded in the PAL color system, the player
outputs the video signal or the setup display etc. in the PAL color system
and the picture may not appear on NTSC color system televisions.
When you play a disc recorded in the NTSC color system, the player
outputs the video signal or the setup display etc. in the NTSC color
system and the picture may not appear on PAL color system televisions.
In these cases, open the disc tray and remove the disc.
Notes
• Refer to the instructions supplied with the component to be connected.
• Do not connect this player to a video deck. If you do, noise may appear in the
picture.
Connect
directly
VCR
TV
CD/DVD
player