Filter
Top Products
98
Additional Information
Troubleshooting (continued)
Symptom
Picture noise appears.
Even though you set the aspect
ratio in “TV TYPE” in “SCREEN
SETUP” of the setup display, the
picture does not fill the screen.
The picture is black and white.
The VIDEO CD menu does not
appear.
There is no sound.
Remedy
• Check that this player is placed in a horizontal position
and there is no mechanical vibration or shock.
• There is a flaw on the disc.
• Picture noise may appear when you use the LASER
LINK function. Use the supplied audio/video
connecting cord to get a clear picture.
• The aspect ratio is fixed on your DVD.
• Depending on the TV, the picture on the screen
becomes black and white when you play a disc
recorded in the NTSC color system.
• Make sure you play a VIDEO CD with PBC functions.
• Make sure you follow the instructions for interactive
operations.
Refer to the instructions supplied with the disc.
• Check that the player is connected securely.
• The audio connecting cord is damaged. Replace it
with a new one.
• Make sure you connect the player to the audio input
connectors on the receiver (amplifier) (page 18).
• Make sure you turn on the TV and the receiver
(amplifier).
• Make sure you select the appropriate input on the
receiver (amplifier) so that you can listen to the sound
from the player.
• The player is in pause mode or in Slow-motion Play
mode. Press H to return to normal play mode.
• The player is in fast forward or fast reverse mode.
Press H to return to normal play mode.
• Check the speaker connections (page 21). Refer to the
operating manual of your receiver (amplifier).
•
You selected a VES mode other than “OFF” in the Control
Menu display when you connected the component using
the optical digital connecting cord. Set “VES” to “OFF” in
the Control Menu display (page 58).
Sound Picture