Filter
Top Products
Settings and Adjustments
92
Note
When you select “D-PCM, ” set Virtual Enhanced Surround (VES) to “OFF.”
Otherwise, the player will not output signals when you have made the connections
using an optical digital connecting cord.
x MPEG
Selects the MPEG audio signals to be output when you have made the
connections using an optical digital connecting cord.
• PCM: when the player is connected to an audio component lacking a built-
in MPEG decoder. If you play MPEG audio sound tracks, the player
outputs stereo signals when you have made the connections using an
optical digital connecting cord.
• MPEG: when the player is connected to an audio component having a
built-in MPEG decoder.
If the player is connected to an audio component lacking a built-in MPEG
decoder, do not set this. Otherwise, when you play the MPEG audio
sound track, a loud noise will come out from the speakers, affecting your
ears or causing the speakers to be damaged.
x DTS
Selects the DTS signals to be output when you have made the connections
using an optical digital connecting cord.
•
OFF: when the player is connected to an audio component lacking a built-
in DTS decoder.
• ON: when the player is connected to an audio component having a built-
in DTS decoder.
If the player is connected to an audio component lacking a built-in DTS
decoder, do not set this. Otherwise, when you play the DTS sound track, a
loud noise will come out from the speakers, affecting your ears or causing
the speakers to be damaged.
Settings for the Sound (AUDIO SETUP) (continued)