Filter
Top Products
Settings and Adjustments
90
Settings for the Sound (AUDIO SETUP)
“AUDIO SETUP” allows you to set the
sound according to the playback
conditions.
The default settings are underlined.
Select “AUDIO SETUP” in the setup
display.
x AUDIO DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a
DVD. This function works only when you play a DVD which has the
AUDIO DRC function.
This affects the output when:
– you have made the connections using an audio connecting cord
– you have made the connections using an optical digital connecting cord
(when you set “DOLBY DIGITAL” to “D-PCM” and “MPEG” to “PCM” in
“DIGITAL OUT”)
•
STANDARD: Normally select this position.
• TV MODE: makes the low sounds clear even if you turn the volume down.
It is especially recommended when you listen to the sound using the
speakers of the TV.
• WIDE RANGE: It gives you the feeling of being at a live performance.
When you use high quality speakers, it is more effective.
Note
When you play DVDs without the AUDIO DRC function, there may be no effect on
the sound.
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
To set, press , then .
To quit, press .
STANDARD
DOLBY SURROUND
DIGITAL OUT
ENTER
DOLBY DIGITAL:
MPEG:
D-PCM
PCM
DTS:
OFF
DISPLAY