Filter
Top Products
74
◆PAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
◆PLAYBACK MEMORY (DVD VIDEO/
VIDEO CD only)
The player can store “SUBTITLE” and other
settings of each disc for up to 40 discs
(Playback Memory).
Set this function “ON” or “OFF.”
The following settings are stored in memory.
–ANGLE (page 58)*
–AUDIO (page 53)*
–BNR (page 59)
–DIGITAL VIDEO ENHANCER (page 62)
–SUBTITLE (page 58)*
–CUSTOM PICTURE MODE (page 60)
* DVD VIDEO only
Note
The player can store the settings of up to 40 discs.
When you store the setting of disc number 41, the
first disc setting is cancelled.
◆TRACK SELECTION (DVD VIDEO only)
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, MPEG audio, DTS, or Dolby
Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 71).
• If PCM, MPEG audio, DTS, and Dolby Digital
sound tracks have the same number of channels,
the player selects PCM, MPEG audio, DTS, and
Dolby Digital sound tracks in this order.
◆MULTI-DISC RESUME (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off. Resume playback point can be stored in
memory for up to 40 different DVD VIDEO/
VIDEO CD discs (page 35).
◆CD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output from the
following jacks:
–LINE OUT L/R (AUDIO) 1/2 jacks
–5.1CH OUTPUT jacks
Note
If you select “ON” when playing CDs with DTS
tracks, the sound will become noisy.
AUTO The picture, including subjects
that move dynamically, is
output with no jitter. Normally
select this position.
FRAME The picture, including subjects
that do not move dynamically,
is output in high resolution.
ON
Stores the settings in memory
when you eject the disc.
OFF Does not store the settings in
memory.
OFF
No priority given.
AUTO Priority given.
ON Stores the resume settings in
memory for up to 40 discs (The
settings remain in memory even
if you select OFF.)
OFF Does not store the resume
settings in memory. Playback
restarts at the resume point only
for the current disc in the player.
OFF
Select this when playing CD
discs, including CDs with DTS
tracks.
ON Eliminates the use of
unnecessary circuits needed to
play CDs.