Filter
Top Products
79
Settings and Adjustments
Be sure to change the value in the Setup
Display when you move the speakers.
The default adjustments are in parentheses.
Notes
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from
your listening position than the front speakers.
• These settings do not affect the Super Audio CD
Multi audio signals.
◆BALANCE
Varies the balance of the left and right
speakers. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
◆LEVEL
Varies the level of each speaker. Be sure to
set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
To adjust the volume of all the speakers at
one time
Use the amplifier’s (receiver’s) volume
control.
◆TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust the “BALANCE” and “LEVEL.”
Adjusting the speaker volume
and level
1 Select “SPEAKER SETUP” in the Setup
Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each
speaker in sequence.
3 From your listening position, select
“BALANCE” or “LEVEL” and adjust the
value of “BALANCE” using C/c and
“LEVEL” using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF”
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.
FRONT
(3 m)
Set this between 1 and 15
metres in 0.2 metre increments.
CENTER
(3 m)
Set this within –1.6 and +0.6
metres of the “FRONT” setting
in 0.2 metre increments. For
example, if “FRONT” is set to 6
metres, “CENTER” can be set
between 4.4 and 6.6 metres.
REAR (3 m) Set this between the “FRONT”
setting and –5 metres in
0.2 metre increments. For
example, if “FRONT” is set to 6
metres, “REAR” can be set
between 1 and 6 metres.
FRONT
(0 dB)
Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
REAR
(0 dB)
Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
FRONT (0 dB) Set this between –6 dB and 0
dB (0.5 dB increments).
CENTER
(0 dB)
Set this between –12 dB and
0 dB (0.5 dB increments).
REAR (0 dB) Set this between –12 dB and
0 dB (0.5 dB increments).
SUBWOOFER
(0 dB)
Set this between –10 dB and
+10 dB (0.5 dB increments).
OFF The test tone is not emitted
from the speakers.
ON The test tone is emitted from
each speaker in sequence while
adjusting balance or level.