Filter
Top Products
25 (GB)
Using On-screen Menus
Clock Display
Displays the set time for about 5 minutes when set to
On.
For details, see “Displaying the time” on page 42 (GB).
On/Off Timer
Sets the time at which the power is automatically
turned on or off.
For details, see “On/Off Timer Function” on page 43 (GB).
Auto Shutoff
Automatically turns off the power when a signal is not
input to the display for a predetermined amount of
time.
Note
This function is available only when a video signal is
being received.
For details, see “Power Saving Function” on page 44
(GB).
Remote menu
This menu is used for remote control settings.
,toselect, to set
ENTER
Remote
Index Number : 1
Remote Only :
Sync Mode :H/Comp
Remote Mode : Of f
Index Number
Sets the index number of the display.
Note
When you set the number, use the buttons on the
display unit. The Index Number cannot be set using
the Remote Commander.
For details about the Index Number, see “Operating a
Specific Display With the Remote Commander” on page
45 (GB).
Remote Mode
When set to Off, the buttons on the Remote
Commander are all disabled. The operation can be
carried out only through the buttons on the display
unit.
Note
When you set the Remote Mode to On, use the
buttons on the display unit. The Remote Mode cannot
be set to On using the Remote Commander.
Remote Only
Select On to disable the control buttons on the display
unit. The display can be controlled using the Remote
Commander only.
To cancel the Remote Only mode, set Remote Only to
Off using the Remote Commander.
Note
The setting in this item is still retained when the AC
power cord is disconnected or when you turn the
display on/off with the Remote Commander.
Input Select menu
This menu is used to switch the input signal.
For details on switching the input signal, see “Switching
the Input Signal” on page 26 (GB).
Unit Status menu
This menu is used for displaying the internal status of
the display unit.
,toselectitem
Uni t Sta tus
Mode l Name: FWD-50PX1
Ser ial Number :
Operation Time:
Sof tware Version:
Sync Mode :H/Comp
Model Name
Indicates the model name.
Serial Number
Indicates the serial number with seven digits.
Operation Time
Indicates the total number of hours of operation.
Note
The standby mode is not counted as part of the
Operation Time.
Software Version
Indicates the system software version.