Filter
Top Products
43 (GB)
Controlling Power On/Off Automatically (Timer Function)
To show the signal currently input and Picture Mode
on the screen when “Clock Display” is set to “On,”
press the DISPLAY button on the Remote
Commander once. Press the button again to put back
the clock. The clock stays on the screen for about 5
seconds.
On/Off Timer Function
1 In the Timer/Clock menu, Press
M
/
m
to move the
cursor (yellow) to “On/Off Timer” and press
ENTER.
The following menu appears on the display panel.
Timer/Clock
Clock Set
Clock Display : Off
On/Of f Timer :
Auto Shutoff :
,toselect,press
to return
ENTER
Off
On
2 Select On with
M
/
m
and press ENTER.
The following menu appears on the display panel.
Timer/Clock
On/Of f T imer : On
Repeat : Of f
Timer Mode : Off
On Time : 00 :00
Off Time : 00:00
set
,toselect, ,to
ENTER
3 Select “Repeat” with
M
/
m
and press ENTER.
The following menu appears on the display panel.
Timer/Clock
On/Of f T imer : On
Repeat :
Timer Mode :
On Time : 0 0 : 0 0
Off Time : 0 0 : 0 0
Off
On
,toselect,press
to return
ENTER
4 Select the repeat mode with
M
/
m
.
Off : Power turned on/off only once
On : Power turned on/off at the same preset time
every day.
5 Press ENTER.
The menu returns to the On/Off Timer menu.
6 Select “Timer Mode” with
M
/
m
and press
ENTER.
The following menu appears on the display panel.
Timer/Clock
On/Of f T imer : On
Repeat : Of f
Timer Mode :
On Time :
Off Time :
,toselect,press
to return
ENTER
Off
On
On/Of f
7 Press
M
/
m
to select the timer mode.
Off : Power turned off at the time set with Off
Time.
On : Power turned on at the time set with On
Time.
On/Off : Power turned on at the time set with On
Time, and turned off at the time set with Off
Time.
8 Press ENTER.
The menu returns to the On/Off Timer menu.
9 Press
M
/
m
to move the cursor (yellow) to “On
Time” and press ENTER.
The following menu appears on the display panel.
The area behind the hour is displayed in light blue.
Timer/Clock
On/Of f T imer : On
Repeat : Of f
Timer Mode : On/Off
On Time : 00 :00
Off Time : 00:00
10
Press
M
/
m
to set the hour and press ENTER.
The time is entered and the area behind the
minutes is displayed in relief.
11
Press
M
/
m
to set the minute and press ENTER.
Press < to return to the screen shown in step 2.
12
Press
M
/
m
to move the cursor (yellow) to “Off
Time” and press Enter. Do the same thing for the
power on hour and minute.