Filter
Top Products
15
Playing the Radio
Manual Tuning
1 Press RADIO ON/BAND [RADIO/BAND]
to turn on the radio.
“RADIO” appears in the Clock Display
Window. The display shows the band and
frequency for a few seconds and then
changes back to the current time.
2 Press RADIO ON/BAND [RADIO/BAND]
repeatedly to select the desired band.
Each press changes the band as follows:
3 Press RADIO TUNE/TIME SET – ,
m(Fast reverse) or +, M(Fast
forward) [TUNE/CH – or +] to tune in to
the desired station.
Two short beeps sound when the minimum
frequency of each band is received during
tuning.
4 Adjust the volume using VOLUME [VOL]
+ or –.
To check the station being received
Press RADIO ON/BAND [RADIO/BAND] lightly. The
Clock Display Window shows the band and
frequency for a few seconds and then changes
back to the current time.
To turn off the Radio
Press OFF.
Switching between
monaural and stereo
The radio is set for stereo reception at the
default setting. If FM stereo reception is poor,
set to “FM MONO (monaural).” Noise will be
reduced although the sound will not be heard
in stereo.
1 Press RADIO ON/BAND [RADIO/BAND]
to turn on the radio.
2 Press RADIO ON/BAND [RADIO/BAND]
repeatedly to select FM.
3 Press MODE/SCREEN SIZE.
“Mono(monaural)” or “ST(Stereo)” appears
in the Clock Display Window. Each time
you press MODE/SCREEN SIZE, the mode
changes to either “Mono” or “ST.”
4 Select Mono or ST.
The mode you select appears in the Clock
Display Window for a few seconds and
returns to the current time.