Filter
Top Products
29
Monitoring video signals
input from a connected
device
Switch the input channel to monitor video
signals input from the device connected to the
VIDEO INPUT connector of the player.
1 Press AUX.
Preparing for the initial
parental setting - LEVEL
Playback of some DVDs can be limited
according to a predetermined level, such as the
age of the viewer. The Parental control
function allows you to set a playback
limitation level.
This setting is available while playback is
stopped and the resume function is canceled.
1 Press SETUP , then press b or B button
repeatedly until “PARENTAL SETUP”
appears on the screen.
2 Press ENTER.
3 Press v or V button repeatedly to select
“Level”, then press ENTER.
4 Press v or V button repeatedly to select
the limitation level, then press ENTER.
5 Enter the password and press ENTER.
(Only when the PARENTAL CONTROL is
set to ON.)
6 Press SETUP to exit the Setup Menu.
Refer to the following table. Parental levels of
the table are on the MPAA (Motion Picture
Association of America) rating system. If you
set this player to level “4” for example, DVDs
with levels “5”, “6”, ‘7", and “8” cannot be
played.
This Player MPAA Rating System
“1” “G”: General audience
“2” –
“3” “PG”: Parental guidance
suggested
“4” “PG13”: Parents strongly
cautioned
“5” –
“6” “R”: Restricted
“7” “NC17”: No one 17 and under
admitted
“8” No restriction
The factory setting is “8.”
2 Adjust the volume using VOLUME [VOL]
+ or – .