Filter
Top Products
35 (GB)
Adjusting manually
(1) Select “Dot Phase” or “Total H Pixel” with
M
/
m
and press ENTER.
The following menu appears on the display
panel. (The illustration below is for selecting
Dot Phase.)
Dot Phase 31
(2) Adjust the dot phase or the total number of
horizontal pixels with
M
/
m
and press ENTER.
To restore Adjust Pixel menu items to their
original settings
In the Adjust Pixel menu, press
M
/
m
to move the
cursor (yellow) to “Reset” and press ENTER. Then
select “OK” with
M
/
m
and press ENTER.
Restoring the Screen Control Menu
Adjustment Values
1 In the Screen Control menu, press
M/m
to move
the cursor (yellow) to “Reset” and press ENTER.
The following menu appears on the display panel.
Screen Cont rol
Wide Setup
Wide Mode:4/3
Screen Zoom :
Screen Size
Screen Shi ft
Adjust Pixel
Reset
,toselect,press
to return
ENTER
Cancel
OK
2 Press M/m to move the cursor (yellow) to “OK”
and press ENTER.
The Screen Control menu items are restored.
To cancel the reset function
Press MENU before pressing ENTER. Alternatively,
select “Cancel” with M/m and then press ENTER.
Resizing and Positioning the Picture
Adjusting the Pixels
If there is too much noise on the edges of the
characters or the vertical lines, you can adjust the dot
phase and the total number of horizontal pixels.
Note
This item depends on the computer signal being used.
1 In the Screen Control menu, press
M
/
m
to move
the cursor (yellow) to “Adjust Pixel” and press
ENTER.
The following menu appears on the display panel.
Screen Cont rol
Adjust Pi xel
Auto Adjust
Dot Phase
Total H Pixel : 1344
Reset
set
,toselect, ,to
ENTER
2 You can adjust the dot phase and the total number
of horizontal pixels automatically or manually.
Adjusting automatically
(1) Select “Auto Adjust” with
M
/
m
and press
ENTER.
The following menu appears on the display
panel.
Screen Cont rol
Adjust Pi xel
Auto Adjust
Dot Phase
Total H Pixel : 1344
Reset
,toselect,press
to return
ENTER
Cancel
OK
(2) Select “OK” with
M
/
m
and press ENTER.
The dot phase and the total number of
horizontal pixels are adjusted automatically.
Note
Automatic adjustment of the dot phase may not
always give satisfactory results. In that case, adjust it
manually.