Filter
Top Products
38 (GB)
When you name the setting, follow the steps below.
7 Press
M
/
m
to move the cursor (yellow) to “Name
Set” and press ENTER again.
The following menu appears on the display panel.
User Memory
Save
Name Set :MEM 01
0123456789ABCDEFGH
IJKLMNOPQRSTUVWXYZ
abcdefghi jklmnopqr
stuvwxyz()[]<>+– /
=% &; : . ' , End
set
,,, toselect, to
ENTER
8 Select a character in the character list with
M
/
m
/
<
/
,
and press ENTER.
The selected character is input.
9 Repeat step 8 and after you have finished entering
the name, select “End” and press ENTER.
The menu returns to the Save menu.
Calling Up a Stored Setting
1 In the User Memory menu, press
M
/
m
to move the
cursor (yellow) to “Load” and press ENTER.
The following menu appears on the display panel.
, to select item
User Memory
Load
Restore
MEM 01
MEM 02
MEM 03
MEM 04
MEM 05
MEM 06
MEM 07
2 Move the cursor to the Memory Number (01~ 20)
of the setting that you want to recall using the
M
/
m
buttons.
The stored adjustment value is recalled.
To restore the value in effect before the recall,
move the cursor to “Restore.”
3 Press the ENTER button.
The display returns to the User Memory screen
used to store and recall adjustment values.
Using the Memory Function