Filter
Top Products
50 (GB)
Specifications
Specifications
Video processing
Preset signal See page 28 (GB).
Sampling rate 13.5 MHz to 140 MHz
Panel system AC-type Plasma Display Panel
Display resolution 1 365 dots
(horizontal)
× 768 lines
(vertical)
Pixel pitch
0.81 (horizontal) × 0.81 (vertical)
mm
(
1
⁄
32
×
1
⁄
32
inches)
Picture size
1 106 (horizontal) × 622 (vertical)
mm
(43
17
⁄
32
× 24
1
⁄
2
inches)
Panel size 50-inch (diagonal 1 270 mm)
Inputs and Outputs
INPUT1/INPUT2
RGB/YUV D-sub 15-pin (female) (×2) (See
“Pin assignment” on page 51
(GB).)
AUDIO Stereo minijack 500 mVrms,
high impedance
SPEAKER 7W + 7W (6 ohms), direct
unbalanced impedance: 6-16
ohms
CONTROL S IN/OUT
REMOTE (RS-232C)
D-sub 9-pin type (×1)
VIDEO (NTSC, PAL, SECAM, NTSC4.43,
PAL60, PAL-M, PAL-N)
1)
COMPOSITE IN BNC-type (×1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75 ohms
(automatic termination)
Y/C IN Mini DIN 4-pin type (×1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75 ohms terminated
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75 ohms terminated
Burst 0.3 Vp-p ±2 dB (PAL),
75 ohms terminated
AUDIO IN Stereo minijack
500 m Vrms,high impedance
COMPOSITE OUT
BNC-type (×1) Loop-through
Safety regulations
UL1950, CSA No. 950 (c-UL),
FCC Class B, IC Class B,
EN60 950 (NEMKO), CE,
C-Tick
General
Power requirements
100 V to 240 V AC, 50/60 Hz,
5.4 A to 2.2 A
Power consumption
490 W
Operating conditions
Temperature: 0 °C to 35 °C
(32 °F to 95 °F)
Humidity: 20% to 90%
(no condensation)
Atmospheric pressure: 700 to
1 060 hPa
Storing/transporting conditions
Temperature: –10 °C to +40 °C
(14 °F to 104 °F)
Humidity: 20% to 90%
(no condensation)
Atmospheric pressure: 720 to
1 114 hPa
Dimensions 1 246 × 755 × 100 mm
(49
1
⁄
8
× 29
3
⁄
4
× 4 inches)
(w/h/d, excluding projections)
Mass 46.7 kg (102 lb 15 oz)
Supplied accessories
AC power cord (1)
AC plug holder (2)
Cable holder A (2)
Cable holder B (6)
Remote Commander RM-971 (1)
Size AA (R6) batteries (2)
Operating instructions (1)
Optional accessories
Display stand SU-P50C
Speaker SS-SP10A
Video input Adaptor BKM-B10
(for the PFM-50C1E only)
Design and specifications are subject to change
without notice.
.........................................................................................................................................................................................................
1) The PFM-50C1E is not equipped with VIDEO connectors. For the PFM-50C1E, composite video and Y/C input can be
input to the display when the BKM-B10 video input adaptor (not supplied) is installed in the display.