Filter
Top Products
30
Displaying the Alarm List —
Alarm Recall
1 Turn on the power of the equipment to be used.
2 Press MENU until the ALARM TIME display
appears on the screen.
The alarm count, date and time are displayed.
The date and time are displayed up to recent eight
times.
To turn off the alarm list on the screen
Press PAUSE/SEARCH. The normal display appears.
To reset the alarm data
Press MENU RESET while the ALARM TIME
display is on the screen.
The alarm count shows “000”.
21
Time
Month-Date
Alarm count
Alarm Recording
<ALARM TIME>
008 12-03
11-01
10-25
10-25
10-25
19:00
23:00
15:00
08:00
06:00
Scanning the Picture of the
Alarm Recordings — Alarm Scan
1 Turn on the power of the equipment to be used.
2 Press PAUSE/SEARCH twice in stop mode.
The SCAn lights in the display window or AL
SCAN on the monitor screen.
3 Press FF ) or REW 0.
The portions where the alarm function worked are
subsequently played back for five seconds one by
one.
Press PAUSE P to view a certain scene in still mode.
(Alarm scan mode is released.)
Press STOP p, PLAY z, FF ), or REW 0 to
release alarm scan mode.
Note
If the tape reaches the end during scanning, the tape is
rewound and the unit enters the stop mode at the
beginning of the tape.
231
On the monitor screen
In the display window
1H12M06S
AL SCAN