Filter
Top Products
40
Specifications
Connector
Alarm input Low level
Alarm output +5 V, 5.7 kilohms (Low active)
Switch output +5 V, 5.7 kilohms
Tape end output +5 V, 5.7 kilohms (Low active)
Warning output +5 V, 5.7 kilohms (Low active)
Timer output +12 V, 5.7 kilohms (High active)
External timer input
Low level
Clock set output +5 V, 5.7 kilohms (Low active)
Clock set input Low level
Series output +5 V, 5.7 kilohms (Low active)
Series input Low level
Remote control input
ø3.5 mm stereo minijack
Other specifications
Operating temperature range
5°C to 40°C
Operating humidity range
80% or less
Power supply 120 V AC, 60 Hz
Power consumption
18 W
External dimensions
Approx. 240 × 96.5 × 333 mm
(w/h/d)
(9
1
/2 × 3
7
/8 × 13
1
/8 in.)
Mass Approx. 3.8 kg (8 lb 6 oz)
Supplied accessory
AC power cord (1)
Optional accessories
SVT-RM10 Remote Control Unit
Design and specifications are subject to change
without notice.
General
Recording method Dual-head rotating helical scanning
system
Audio recording In 6-, 18- and 30-hour modes
(when using T-120 tape)
In 8-, 24- and 40-hour modes
(when using T-160 tape)
Tape speed 11.12 mm/sec (6-hour mode)
Specified video cassette tape
VHS 1/2 inch video cassette tape
Recording/playback time
6, 18, 30, 48, 72 and 96H hours
(when using T-120 tape)
8, 24, 40, 64, 96 and 126H hours
(when using T-160 tape)
Fast-forward/rewind time
Approx. 2.5 minutes (when using
T-120 tape)
Color system NTSC color
Video
Recording method Luminance signal: FM method
Color signal: Low-pass band-pass
Transformation direct recording
method
Input BNC: 1 Vp-p, 75 ohms unbalanced
Output BNC: 1 Vp-p, 75 ohms unbalanced
S/N 43 dB
Horizontal resolution
Black & white mode: 350 lines
Color mode: 300 lines
Audio
Input 315 mV (–7.8 dBs), phono jack
47 kilohms unbalanced
Output 315 mV (–7.8 dBs), phono jack
600 ohms unbalanced
Microphone input –60 dBs,
ø3.5 mm minijack,
600 ohms
S/N 40 dB (6-hour mode)