Filter
Top Products
Using the menu system
14 Using the menu system O
Technical Information
Manufacturer Information
This is an information screen only and tells you the current
version of software installed in your receiver.
This option gives you an on-screen description of some of the
features available on this receiver.
1
Enter the Technical Information menu from the main
menu. ‘Manufacturer Information’ will be highlighted.
Press the OK button to select. The Manufacturer
Information display appears.
2
After viewing the information displayed press the BACK
button repeatedly to return to the main menu.
Signal Strength
This is an information screen only and shows the signal
strength of the broadcast you are watching.
1
Enter the Technical Information menu, highlight ‘Signal
Strength’ and press the OK button to select. The Signal
Strength display appears.
2
After viewing the information displayed press the BACK
button repeatedly to return to the main menu.
Software Upgrade
Periodically Sony will issue upgrades for the software that
was initially installed in your receiver. These upgrades will
automatically be received and enabled. If desired, you can
disable this option as follows:
1
Enter the Technical Information menu, highlight
‘Software Upgrade’ and press the OK button.
2
Press the V or v button to highlight ‘Off’ and press the
OK button to confirm.
Note: Sony recommend that you always leave this option set to
‘On’.
Upgrades will only occur when the receiver is switched
on and is out of Standby.
1
With ‘Feature Pages’ highlighted in the main menu,
press the OK button to display a ‘Welcome’ screen.
Press the V or v button to view each feature. The
example shown is the EPG.
2
When you wish to return to the main menu press the
BACK button.
Feature Pages
Text.fm Page 14 Tuesday, April 27, 2004 8:21 AM