Filter
Top Products
Instruction Manual
33
2. Click Network, in the Main Menu on the left hand side, next click IP Settings.
3. The IP Settings window is now displayed. Through the IP Settings you can view
your IP settings, or choose between automatically or manually setting static
Internet Protocol address Information.
By Default the Internet Protocol Information is set to Automatic IP. If you would prefer
to manually set your internet protocol address place a bullet in Static IP address and ll
in your information accordingly in the elds below, then click the apply button.
If you have selected Automatic IP:
The IP Information will be displayed in the specied elds, please take note while in
this mode the IP address of the unit is obtained through DHCP and may change at any
time.