Filter
Top Products
Instruction Manual
39
UPnP Port Mapping (Universal plug and play)
Enables the enclosure to automatically nd and communicate with your router and
open any ports required to access the NAS over the internet. This is not recommended
for most users unless you intend to access the NAS remotely.
Place a bullet under Enable or Disable next to UPnP Port Mapping depending on your
preference.
Note: Once you have click enabled the enclosure will automatically attempt to update
the router which could take several seconds. If you have chosen to enable UPnP please
ensure UPnP has also been enabled on your router. For further assistance please
contact your network administrator.
Port mapping and URL Display
The access ports can also be manually assigned and viewed from within the Service
Port page of the networking section.
Below is a list of congurable and viewable items:
Administration Listen Port: Displays and enables the user to alter the access port
used for the Web conguration GUI to communicate.
Administration URL: Displays the URL used to access the Web conguration GUI
locally.
WebDAV Listen Port: Displays and enables the user to alter the access port used for
the WebDAV to communicate.