Filter
Top Products
Instruction Manual
35
2. Click Network, in the Main Menu on the left hand side, next click PPPoE.
3. The PPPoE window is now displayed. Through the PPPoE window you can connect
your enclosure directly to the Internet via a PPPoE (Point-to-Point Protocol over
Ethernet) Internet Service Provider.
4. To setup, enter the username and password provided by your Internet Service
provider into the specied elds and click the apply button.
Note: Service Name is an option eld used for your personal identication of the ISP.
The Service Name will not impact your connection.
5. (Optional) The service on Demand eld, allows you to specify whether you would
prefer the service connect automatically or manually.
By default the service is set to Disabled meaning it will always try to connect
automatically. If you would prefer to only connect manually, change the drop down to
Enable.
Note: To enable manual connection use the Connect button on the status page. See:
View and Change information for manual connection instructions.