Filter
Top Products
Chapter 6: Advanced Chassis Setup
6-7
Figure 6-5. Installing the Expansion Card and Riser Card
Riser Card Slot
Expansion Card Clip
PCI Slot Cover
Expansion Card
Clip
Figure 6-4. Locating the Expansion Card Clip
Installing the Expansion Card
1. Power down the server, disconnect the power cord from the power supply and
remove the cover. Locate the expansion card clip on the back of the chassis
2. Remove the screws holding the expansion card clip and the PCI slot cover
which covers the PCI slot opening in the back of the chassis.
3. Remove the expansion card clip and the PCI slot cover from the chassis.
6-6 Installing an Expansion Card
The SC504 chassis includes a PCI slot for an optional full-height, half-length ex-
pansion card. A riser card is required in order to connect the expansion card to the
motherboard. For further information on expansionon cards and risers cards, visit
the Supermicro website at www.supermicro.com