Filter
Top Products
www.svat.com
page 9
(3) SD Card Status:
SD Card has not been inserted or is malfunctioning
SD Card is proceeding file testing
SD Card is functioning normally
Disk full and overwrite record
IMPORTANT
When SD card is not inserted, record and playback function is inapplicable, but
monitoring is applicable.
RECORD MODE
1. START RECORD: 3 types of recording mode
Manual Record: Suitable to record anytime. Press Rec Button, to enter manual
recording status (start recording). For more information, please refer to Record Setup.
Motion Detection Record: Suitable to record, when there are severe image changes.
Motion detection triggers schedule recording, but it will only start recording when the
variation exceeds the alarm limitation value. For more information refer to Record setup.
Continuous Record: Suitable on few constant frame recording or on long-term continuous
recording. For more information, please refer to Record Setup.
2. STOP RECORD
Pressing the Stop button stops the manual recording only. By Entering Play or Menu
schedule recording (Motion Detection and Continuous Record), every type of recording
will be stopped. To continue recording, please follow the methods below to restart
recording.
Manual Record Repress REC button
Schedule Record
Motion Detection
3. RECORD DISPLAY:
Indicates recording is in progress
Manual Record
Schedule Record
Motion Detection Record
C
After exit playback or menu mode, whether the
setup has been changed or not, the system will
automatically re-check the record schedule
setup again.
2
0
0
4
/0
2
/
0
1
0
8
:
1
0
:
0
3
OPERATION CONTINUED