Swann SW242-6T4 DVR User Manual


 
Digital Video Recorder User Manual
32
STEP2 Enter the menu after word-‘USB’ is displayed on the live mode.
STEP3 Press "Up" and "Down" buttons to move the cursor on "UPDATE" button.
STEP4 Press "Enter" key to start updating.
Process of backup is shown as Fig3.32 Updating.
Fig3.32 Updating
STEP5 After the program checked is done, the system will restart.
If DVR reboot normally, DVR is updated.
LOAD DEFAULT
Fig3.33 Load Default
Load Default menu is shown as Fig3.33 Load Default. It loads the factory default setup.
CLEAR ALARM OUT
Clear the current alarm out, referred Fig3.34 Clear Alarm Out.
Fig3.34 Clear Alarm Out