Filter
Top Products
Digital Video Recorder User Manual
33
3.3 Shortcut Menu
3.3.1 PTZ
Fig3.35 PTZ Mode
PTZ mode is shown as Fig3.35 PTZ Mode. In order to switch the channel to which connects the video output of the Speed
Dome, you may press "PTZ" button to enter the PTZ mode.
In the live view of PTZ mode, the default channel is channel 1, you can use Remote Controller to change the channel
number to enter the corresponding channel PTZ mode.
SPEED
STEP1 In PTZ mode, press "Speed" button.
STEP2 Press "+" and "-" buttons to change the rotational speed.
STEP3 Press "Up", "Down", "Left" and "Right" buttons to rotate the Speed Dome to certain position.
ZOOM
STEP1 In PTZ mode, press "ZOOM" button.
STEP2 Press "+" and "-" buttons to zoom in and zoom out.