Filter
Top Products
Setup
8 Rackmount DVD/CD Duplicator User’s Manual
4. Connect one end of the included power cable to the back of the DVD/CD
Duplicator. Connect the other end of the power cable to a three-prong recep-
tacle AC outlet.
5. Turn on the power to the DVD/CD Duplicator by pressing the power button
on the lower front-center of the unit.
During initialization, the DVD/CD Duplicator performs a self-test in which
the unit’s internal buffer is tested, source and target drives are detected, and
the LCD display is tested. Once the initialization is complete, the DVD/CD
Duplicator is ready for use.
The LCD initially displays the Copy function by default.
Figure 6. Copy Function on LCD Panel
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
damage to the unit and electrical shock.
Note: This unit features an internal switching power supply, which will
automatically switch within a range of 100 to 240VAC as required.