Filter
Top Products
Loading and Ejecting Discs
30 Rackmount DVD/CD Duplicator User’s Manual
Loading and Ejecting Discs
To load a disc into the source or a target drive, first open the disc tray by pressing
the Load/Eject button on the front of the drive. Place the disc on the disc tray with
its label side facing up. Then press the Load/Eject button again to retract the disc
tray back into the drive.
To eject a disc from the source or a target drive, press the Load/Eject button on the
front of the drive to extend the disc tray. Remove the disc from the disc tray and
place it in its protective case. Then press the Load/Eject button again to retract the
disc tray back into the drive.
Figure 8. Ejecting the Disc Tray
MU
L
T
I
R
E
C
O
R
DER
Press the Load/Eject button
to extend and retract
the disc tray.