Filter
Top Products
FAQ
Rackmount DVD/CD Duplicator User’s Manual 27
FAQ
5. What does the Target Overflow message mean?
This message may be displayed when the source master CD disc contains
data/music in excess of the 700MB/80min disc capacity.
These types of discs are often called “Overburn” discs. Attempting to copy an
Overburn disc might generate read errors at the end of the disc, making the
disc unreadable in regular CD readers. Although this type of recording is not
recommended, this unit is capable of duplicating Overburn discs.
Refer to “12 Advanced Setup (Adv Setup)” on page 20 for more information.
Then, execute function “12.2 Overburn” on page 20 to change the setting to
the ON state. Follow the instructions to exit the Advanced Setup first, and
then execute the [1. Copy function]. This time, the unit will again display the
message and prompt you to continue. Press the
(ENT) button to create an
Overburn copy.
This message may be displayed when a source DVD disc is copy-protected,
such as a purchased/rented DVD movie/game. There is no Duplicator on the
market that can copy these discs, as doing so is a violation of Federal law.
Replace the source DVD disc with a non-copy protected disc.
This message may also be displayed if the Source DVD disc has a capacity
larger than the DVD disc in the target drive. Make sure that both source and
target discs have the same capacity. For example, if the source DVD disc is
an 8.5GB capacity disc, make sure the target DVD disc is also an 8.5GB disc.
6. What media is recommended?
For best results, brand-name media is recommended (for example: Memorex,
Imation, TDK, Verbatim, Fuji-Film, etc.)
7. How do I copy a CD+G (Karaoke) disc?
The
CD+G feature is set to OFF as a default.
Refer to “12 Advanced Setup (Adv Setup)” on page 20 for more information.
Then execute function “12.11 CD+G” on page 22 to change the setting to the
ON state. Follow the instructions to exit the
Advance Setup first, and then
execute the [
1.Copy] function.
8. How do I copy a CD Text disc?
The CD Text feature is set to “OFF” as a default. Refer to “12 Advanced
Setup (Adv Setup)” on page 20.
Then execute function “12.13 CD-Text” on page 22 to change the setting to
the
ON state. Follow the instructions to exit the Advance Setup first, and then
execute the [
1.Copy] function.