Filter
Top Products
- 23 -
DV-B420 Digital Terrestrial Receiver
- 22 -
DV-B420 Digital Terrestrial Receiver
Menu Operation
2. VIDEO Output
Select VIDEO Output mode : Composite Video or RGB or S-VHS or Component.
Note :
Your selection will control only the output from SCART
What is Composite Video?
It is simply the normal video signal you would expect from an AV output.
What is RGB?
The RGB selection is the factory default.
The RGB selection will allow the best picture quality from your digital receiver.
This feature will only work if your television supports RGB input and the SCART to SCART
cable MUST be used.
What is S-VHS?
The S-VHS delivers signal with each separate Chromaticity & Luminance to make better
quality of color. Special Scart to S-VHS adaptor is required and not supplied with the
product.
What is Component YPbPr?
The Component selection(or sometimes called DVD input) may be available on some TVs.
Simply connect a 3 colored lead from YPbPr to your TV component input. Be sure to select
it on your TV remote controller.
Setup
This menu helps you to set up Menu Language, VIDEO Output, Screen Type, Banner
Time, and Other Setting.
Select Setup in the Main Menu. The following submenu will show up on your TV.
1. Menu Language
This menu Language provided only in English.
Note : Due to the complexity of this product
only English is provided. Check
TEAC's website for future updates.
http://stb.teac.com.au
Menu Operation